Telnet Installation on Windows 10

Telnet Installation on Windows 10

Have you ever run the Telnet program and the results as below appear? The message informs that the command prompt does not recognize Telnet commands. If you are using Windows 7 or higher, you can immediately activate the Telnet program that has been provided in Windows.

Here’s the guide I applied in Windows 10 :

  1. Click Start, then type the program, then the result will look like the following image, click Add or remove programs.

  1. Click Programs and Features.

  1. Click Turn Windows features on or off.

  1. Scroll down and find Telnet Client, check it and click OK.

  1. Click Close when you’re done.

  1. Please try again as in the initial image and it will show a different result (in this case the Telnet command has already run).

Oh yes, what is Telnet? I will discuss it in another article. Thanks.

 

NetSetMan Installation

NetSetMan Installation

For me who often changes work locations with a laptop and sometimes needs to configure the IP address to connect to a network, it will be very troublesome if done manually. However, it will be easy if you use the NetSetMan application.

NetSetMan is an application that is used to set network profiles in the Windows operating system in 6 different profiles, structurally that can be set in profiles including:

  • IP addresses (IPv4 & IPv6!)
  • Gateways (including Metrics)
  • DNS Server
  • Server WINS
  • WiFi Management
  • Computer Name
  • Workgroup
  • Standard Printer
  • Network Drives
  • Status NIC
  • Machine (RAS / DUN / PPP / VPN)
  • Suffix DNS
  • Route Table
  • Server SMTP
  • Host Files
  • System Settings
  • MAC Address
  • Scripts (BAT, VS, JS, …)
  • Running the program

Additions only in the Pro version:

  • Can be used in the office
  • Unlimited number of profiles
  • Network Domain
  • Complete Proxy Settings & Browser Start Page (Internet Explorer, Firefox, Opera)

Of the many features above and enough for me to use the free version, only the IP & Gateway and DNS Server I use frequently.

I will immediately provide a guide for installation and use:

  1. Download the app on https://www.netsetman.com/en/freeware or https://www.netsetman.com/netsetman.exe. This application only supports Windows XP, Vista, 7, 8, 10 32 bit and 64 bit versions with free and paid licenses.
  2. Once downloaded, the installation is quite easy, just click Next and Finish.

  1. Here’s the initial look after installation, for the process is very easy:
  2. Click Double-click to give the profile name such as office.
  3. Select the interface to be assigned an IP on the down arrow.
  4. Check the fields you want to fill in in IP & Gateway, DNS Server, WINS Server and Additional, and click Activate to process.

g

  1. Repeat step 3 if you want to create another network profile in SET1 to SET5, it’s very easy, right, with just one click, I can activate the saved profile. If 6 profiles are still missing, please use the paid version to get the features mentioned above.

  1. All the settings and changes you’ve made are stored in a separate file (settings.ini), so it’s okay if you want to copy or move the settings to another computer.

Good luck and hopefully avoid the hassle of IP charging. Thanks.

 

Removing Test Mode Message in Windows

Removing Test Mode Message in Windows

Suddenly on the bottom right of my laptop screen appeared info like the image above which was quite disturbing to the view of the wallpaper used.

Quoting information from Microsoft , namely “The test mode message indicates that the test signing mode on the operating system starts on the computer. Test signing mode can be initiated if the program is installed in the testing phase because it uses a driver that is not digitally signed by Microsoft.

Microsoft is adding a test mode to Windows so that users can test programs without having to provide an authentication certificate.” But if I searched before, it seems that the drivers I use are official from each of the existing vendors, whether there is an automatic update to a certain party.

How to delete it is also very easy, currently I use the Windows 10 OS, but this method can also be applied in Windows 7 and Windows 8, only the difference is in the Command Prompt search, the commands used remain the same..

Here’s how to delete it:

  1. Click the Windows logo and then type cmd, then the search results will appear, right-click on the Command Prompt and then select Run as administrator, click Yes to continue if a warning window appears.

  1. Type “bcdedit -set TESTSIGNING OFF in the Command Prompt window that appears and then press Enter, if it has been successful, please restart Windows to see the result, very easy isn’t it.

Good luck and a great day.

 

Choosing an External Hard Drive

Choosing an External Hard Drive

Today still don’t have an external hard disk (HDE)? yes, no problem, hehehe.

I just want to share if you want to buy HDE, here is my advice:

  1. Make sure to buy from an authorized warranty, not a store or distributor’s warranty. If you buy it online, make sure the store is an official store / partner / reseller, to be honest it is a bit difficult if you buy it offline or to a direct store where we may not know the reputation of the store, but you can still ask about the status of the HDE warranty.
  2. The market price of the official warranty and the store warranty is quite far apart, there can be a difference of hundreds of thousands of rupiah or maybe more.
  3. Capacity in general, either official or store warranty is not very significant.
  4. Operating System (OS), make sure it also supports the device you are using
  5. For this point, it may be a bit missed (and I also missed it before the case below), namely the hard disk (HD) and the case are as separate as possible, you can look at the reviews or ask the store where you bought it.

I think the HDE is separate between the hard disk (HD) and the case*, because of the few HDEs I’ve ever opened, it’s always separate. I got this problem when a friend asked to check the HDE (2.5 inches / the size of a notebook HDD) which was problematic and indeed I checked it was unstable for the power and I asked for permission to open it, and only then did I find out that the HD and the case are one. So in the sense that the HD has been installed with data and power components (cannot be separated) and the repair process is also quite difficult (unless it is done by experts).

*the case here means that  the HD cover and the plug components (data and power) are separate from the HD.

So what I mean in this sharing is, if you want to buy HDE, it would be good if you looked for info first whether the HDE is separate between HD and the case, for this I recommend you can look for it on Youtube (because there is a live video on how to open it). This is aimed at, if the HDE has a problem, it can make it easier to check, whether HD or the case. If it’s HD, just buy HD again and vice versa.

This time I opened the HDE Seagate Expansion Desktop 4 TB (3.5 inches) that I just bought in April 2018, why did I buy it?   😊 Here are the results after I opened it (I actually wanted to make the video, but when I opened the cover, it was quite difficult). For the 2.5″ HDE, there is also a separate one.

“Note: Opening the case during the warranty period will cause the warranty to be lost, please do so wisely.”

Why didn’t I mention the HDE that is integrated with the case ? because I don’t want to corner a certain brand. Am I pro to Seagate ? Not really, because even in the example above I have violated the warranty rules (forfeited warranty) at my own risk, which in fact may not need to be done because there is a lot of information on the internet.

As I have informed above, many HDE brands are also separate between HD and the case, but again my goal in this article is to make it easier to check if there is damage. Happy choosing.

 

Connecting a Bluetooth Headset in Windows 10

Connecting a Bluetooth Headset in Windows 10

Do you have a Bluetooth headset and there is also a Bluetooth feature on your laptop? Let’s try to connect the device so that you can listen to music in a different way. Let’s just practice it:

  1. Enable Bluetooth on your headset and laptop.
  2. Generally, the settings in Bluetooth headsets  are passive because they only receive transmissions from other devices, so in this there is nothing to do.
  3. On a laptop, click the Bluetooth icon in the Taskbar and select Add a Bluetooth Device, a new window will open and click Add Bluetooth or other device and select Bluetooth then it will start the search process. If the headset device has been found, click the name of the device for the pairing process, wait for the process to complete, and then click Done.
  1. You can try listening through the headset to make sure the above steps have worked.
  2. If you turn off the laptop, then the connection will be automatically disconnected, to reconnect it, click Add a Bluetooth Device again and select the headset in Audio that has been connected before, click Connect until the status is Connected voice, music.

  1. To disconnect, click Disconnect or Remove device to remove the connected device.

Good luck.

 

  • slot gacor 2024slot danasigma168slot pulsaslot gacor 2025slot 2025slot dana